Nema 23 Stepper Motor 3Nm/425oz.in 4.2A 4-wires 10mm Shaft CNC Mill Lathe Plasma Router
-20.90/piece This is the strongest model for Nema 23 stepper motor, it with 1.8°step angle (200 steps/revolution). Each phase draws 4.2
A, allowing for a holding torque of 3.0
Manufacturer Part Number 23 HS45-4204 S Step Angle 1.8° Holding Torque 3.0 Nm(425oz.in) Rated Current/phase 4.2 A Phase Resistance 0.9ohms Voltage 3.78 V Inductance 3.8m H±20%(1 KHz) Weight 1.8kg
Drawing Wire Connection
Why Stepper Online ?
Over 10,000 Products In Stock :
Our veteran engineers selected hundreds of typical models from our sales records, and we stocked in our warehouse. More than 10,000 products are ready to ship and we promise delivery your goods in 24 Hours!
Low Prices Direct From Factory Suppliers :
As a China-based distributor, Stepper Online has developed long lasting ties with more than 50 factories. We purchasing products with huge quantity to lower the cost as possible. Even our prices are lower than the price you get from manufacturer directly.
Fast Delivery Around The Globe :
During 2015, we have built four warehouses which located in US, UK, Germany and Australia. Partnering with local logistic service providers, we can ship faster and receive return goods more easily.
High Quality With Global Standards :
Cooperate with Top 3 famous manufacturers to make sure the products are produced with high quality, and in-house QC dep., ensuring each and every item purchased meets global quality standards.
Customer Service & Technical Support :
You will get in touch with Stepper Online through Telephone, Email and also online Live Chat, our engineer are ready to serve you!
Flexible Customization :
Small quantity, and customized products are available, we will delivery your samples within incredible short time.
Feedback & Contact
We strive to maintain the highest standards of excellence for shopping experience and 100% customer satisfaction! Positive feedback is very important to us. We sincerely request that you contact us immediately before you give us neutral or negative feedback, so that we can satisfactorily solve your concerns. For anything questions about product, price, shipping or order status, please contact us by using message or online chat tool.
Warranty & Refund
All items sold are brand new and 1 YEAR WARRANTY after sales. If you receive a wrong or defective item please email us within 7 days from the date you receive the product. Later than 15 days the item cannot be accepted for returning. If the goods are defective, we will send replacement parts or refund to you after receiving the proof of the defective photos of the items that you received. Shipping and handling are not refundable. Due to custom restrictions, please contact Stepperonline Customer service before you return the goods.
About Stepper Online
In 2005, Stepper Online founded as a wholesaler for stepper motors, stepper motor drivers, power supplies and cnc router kits. In 2008, Stepper Online's annual revenues reach 3 million. In 2013, Stepper Online was acquired by OMC Coporation (the leading company in Motion Control industry) formally. In 2015, Stepper Online have built four warehouses which located in US, UK, Germany and Australia.
- Brand Name:
- Step Angle(degrees):
- 1.8 deg.
- Current / Phase:
- Holding Torque:
- Model Number:
Shipping : It's suggested to ship this motor by EMS, saving your shipping fee, safer and quicker. Please order and we will adjust the EMS shipping fee to you acccording to it's actual cost. EMS shipping duration : 57 working days EMS ref. cost for 1 pc of the item : South Korea,Japan : 15 USD Malaysia, Mongolia, Thailand,Singapore,Indonesia : 21 USD Southeast Asia : 23 USD Australia,New Zealand : 24 USD United States : 28 USD Canada, Western Europe : 32 USD India,Pakistan : 34 USD Russia, Brazil ,Argentina : 38 USD Africa : 50 USD Nema17 stepper with 600mm Tr8*4 Leadscrew Threaded n Nut Order No...
Great News! for USA buyers ,Ship from USA warehouse, after payment, within 35 days for receiving products! No taxes from customs, no damage, better service, please don't hesitate! This Item includes : 3 Axis CNC Nema42 3256ozin110 BYGH150001 & Nema42 Driver DQ2722 MA,Cheap CNC kit ! 3 PCS Nema 42 Stepper Motor with 3256ozin holding torque,110 BYGH115001 3 PCS Stepper Driver with 110220 VAC,7.0 A, 300 Microstep, DQ2722 MA 1 PC DB25 Breakout Board & 1 Cable for free offering 1, stepper motor110 BYGH150001 Technical Specifications Part No...
1 PCS — Nema34 86x80 mm Stepper Motor 14mm General Specification : Shipping terms Our products are sold worldwide. But if your country is more difficult to transport goods, please contact us in advance to confirm shipping cost. Payment We accept paypal credit, bank transfer, western union etc. Payment must be made within 7days calendar days of the auction end time. Problems And Feedback Please give the opportunity to resolve any problem, we will try our best to help you. Your satisfaction is very important for our store, so please contact us before you want to leave a negative feedback. Thanks very much in advance. Refund If you are not satisfied with our package like the products is damage, please do not sign it and contact immeditely. If it is possible, please take some photos or make a small video about it...
2pcs / lot Nema 34 stepper motor brake 24 VDC 2 N (278ozin) Off Brake power stepper Nema34 4lead 114 mm body length Nema34 brake Function Description NEMA 34 stepping brake motor : Low noise level Adjustable speed Long life characteristics High step angle accuracy Measurement and connection of NEMA 34 stepping brake : If need the motor driver and bracket, Please click on the following link to buy : Motor driver Engine mount bracket Application of stepper motor : Stepper motor can be used in such areas as industrial control gearbox, powder packaging machine, CDROM, winding machine, printing machine, cutting machine, engraving machine, printer, plotters, robotics and other related products. Related Stepper Motor Search : Motor, stepper motor, stepper motor, gear stepper motor, stepper motor, geared motor, Elektromotor, AC motor, motor reducer dc, geared motor, electric motor, Getriebemotor, hybrid stepper motor, 2phase stepper motor , Nema 11 stepper motor, nema 8 stepper motor, nema 14 stepper motor, 20 mm frame stepping motor, 57 mm frame stepper motor, 86 mm frame stepper motor, nema 17 stepper motor, nema 23 stepper motor, nema 34 stepper motor, nema 42 stepper motor Different stepper motor for you choice : Wire stepper motor mode :
NEMA34 stepper motor 34 HS465004 S 1.8 degree, 5 A, 8.5 N.cm With the highest possible torque as well as compact dimensions (86 x 86 mm Nema 34), the Nema 34 Stepper Motor series offers a high resolution and is employed with economically priced drives for precision speed and positioning applications...
Big Surprise! ACT Motor has opened Germany warehouse! Ship From Germany Warehouse by DHL to EU countries! No import tax! Faster Delivery! Less Damage! Welcome to my store! Wish you have a nice shopping! This item includes : 1 PC Nema23 Stepper Motor 23 HS6620 B Dual Shaft : 1.8degree, 2 A, 1.26 NM(185ozin), 2 Phase, 6Lead, 56mm motor length Please check the specification carefully! Please confirm the shipping cost and method before payment! Any question, feel free to contact me! Attention Pleaae : For Wiring, Two ways : To achieve High Holding Torque(1.26 Nm) and Slow Speed : Black : A+; Green : A; Red : B+; Blue : B White and yellow wires don't need to connect To achieve Low Holding Torque(0.9 Nm) and Fast Speed : Black : A+; Yellow : A; Red : B+; White : B Green and blue wires don't need to connect
20pcs 6x14 614 DC Coreless Motor 3.7 V 0.08 A 51000 RPM Helicopter Aircraft Toy Strong magneti Specifications : Motor diameter : 6 MM The motor length : 14 MM Output shaft : 0.8 MM The output shaft length : 6 MM Weight : 2 g Voltage : 3.7 V Current : 0.1 A (with a small propeller speed) The noload current : 0.08 A (stall around 1.18 A) Speed : 51000 RPM Length : about 16 MM About speed, one thing to note : we test speed, noload speed, because the plastic film speed measuring our, processed into light, on the motor effects are negligible, (our data must be after the power on test motor derived), and then the hollow cup small motor load slightly different speed will certainly change, so the load speed, each different, we have no conditions can be tested...
Welcome to my store! Wish you have a good shopping! Pls confirm the shipping method and shipping fees before pay! Feel free to contact me for any question! 1 stepper motor : Nema 34 85 BYGH450 C012 B with 1600ozin We have both single shaft and dual shaft in stock...
57 BYG Nema23 Gear Stepper Motor Gearbox Ratio 5 : 1 Length 112mm 4.2 A 3 Nm for DIY CNC Router Engraving Model : 57 HS11242 A4 G05 10 20 30 50 100 Current : 4.2 A Before decelerating static torque : 3 NM Ratio : 5,10,20,30,50 optional Shaft : 8mm Body length : 112mm Shaft length : 27mm D Gearbox : 60mm*60mm*41.5mm Outlet : twophase fourwire Wiring : black line=A+, green line=A, red=B+, blue line=B Stepper motor driver adapted : M542
Speed Rati20 : 1 NEMA34 7 A 10 NM 1429ozin L 98mm Gear Reduction Motor+Drive CNC machining New In Box Appliaction : Inject printers, Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, engraving machine, packaging machinery, CNC numericallycontrolled machine tool and transmission...
1minute High Start Speed Offline command input terminal High holding torque at high speed Average current control, 2phase sinusoidal output current drive A stepper motor is an electric motor that is able to create sharp movements...
3 PCS NEMA23 stepper motor J57 HB5603 4Leads 0.9 N.m(129ozin) 3.0 A motor length 56mm shaft diameter 8.0mm for laser machine General specifications Step Angle Accuracy : 5% Temperature rise : 80°c Max Ambient temperature : 20°c~+50°c Insulation resistance : 100 MΩ Min 500 VDC Dielectric strength : 500 V AC 1minute Shaft Radial Play : 0.02mm Max(450gload) Shaft Axial Play : 0.08mm Max(450gload) Specifications : Model Step Angle (°) Length L(mm) Holding Torque (N.m) Current (A / Phase) Resistance (Ω) Inductance (m H) Rotor inertia (g.cm2) Weight (kg) Shaft diameter (mm) Axis stretch (mm) Lead wire J57 HB5603 1.8 56 0.9 3.0 0.75 1.1 300 0.7 8.0 Leveling block 0.5x20 4 wires Only the representation of the products, we can design according to clients’ requirement Dimension : unit=mm Frequencytorque characteristics Wiring Diagram Installation precaution Data of electrical characteristics and technical data are both measured by JB542 M driver, testing voltage DC28 V...
NEMA 23 Worm Gearbox Stepper Motor 7.5 : 180 : 1 CE ROHS Motor Length 56mm 153ozin Nema23 Worm Reducer Gear Stepper Motor Material for worm reducer gearbox : Worm wheel : Nodular cast iron and bronze Worm shaft : 20 Cr steel.The hardness of surface is 5662 HRC with carbonized layer 0.30.5mm Housing : aluminum with oven painting Color : silver Feature Description of nema23 worm gear stepper motor : 1) High quality aluminum alloy die cast gearbox 2) High accuracy worm gear and worm shaft 3) Less noise and lower temperature increase 4) Easy mounting and linking, high efficiency The specification of worm gear stepper motor nema 23 : Item Specifications Step Angle Accuracy ±5% Resistance Accuracy ±10% Inductance Accuracy ±20% Temperature Rise 80 C max(rated current, 2 phase on) Ambient Temperature 20 C~+50 C Insulation Resistance 100 MΩ Min.500 VDC Dielectric Strength 500 VAC / 1 minute The dimension of worm gear reducer : The dimension and wiring of nema23 stepper motor body 56mm : The shaft diameter is 11mm with key. If diameter is 8mm, should mount shaft sleeve before assembling with this worm reducer. Contact if need shaft sleeve. Packing Included : worm reducer+stepper motor+output shaft+ key and other parts (To reduce package volume and for easy shipment, we send the worm reducer and stepper motor seperately...
Package include : 1 x 17 HS8401 Stepper Motor General Specification : Step angle accuracy : + 5%(full step,not load) Resistance accuracy : + 10% Inductance accuracy : + 20% Temperature rise : 80deg Max(rated current,2 phase on) Ambient temperature —20deg ~+50deg Insulation resistance : 100 MΩ Min,500 VDC Insultion Strength500 VAC for one minute Datasheet(17 HS8401,1.8 A,78 ozin or 4.8kg.cm holding torque,5mm diameter shaft) : Model Step Angle(deg) Motor Length(mm) Rated Current(A) Phase Resistance(Ohm) Phase Inductance(m H) Holding Torque(N.cm) Detent Torque(N.cm) Rotor Inertia(g.cm2) Lead Wire(No) Motor Weight(g) 17 HS2408 1.8 28 0.6 8 10 12 1.6 34 4 150 17 HS3401 1.8 34 1.3 2.4 2.8 28 1.6 34 4 220 17 HS3410 1.8 34 1.7 1.2 1.8 28 1.6 34 4 220 17 HS3430 1.8 34 0.4 30 35 28 1.6 34 4 220 17 HS3630 1.8 34 0.4 30 18 21 1.6 34 6 220 17 HS3616 1.8 34 0.16 75 40 14 1.6 34 6 220 17 HS4401 1.8 40 1.7 1.5 2.8 40 2.2 54 4 280 17 HS4402 1.8 40 1.3 2.5 5 40 2.2 54 4 280 17 HS4602 1.8 40 1.2 3.2 2.8 28 2.2 54 6 280 17 HS4630 1.8 40 0.4 30 28 28 2.2 54 6 280 17 HS8401 1.
86 J18156 EC1000+2 HSS86 H Closed loop stepping system 12 N.m Nema 34 Hybird closed loop 2phase stepper motor Russia : Please provide the Full name of the recipient Korea : Please provide 5Digit Zip Code...
We produce planetary gearbox from 28 to 57 size , can match stepping motor and bldc motor , ratio include 1 : 3 1 : 4 1 : 5 1 : 10 1 : 15 1 : 20 1 : 30 1 : 40 1 : 50 ...
1 Consignee Please use a Full Name as the consignee, or cargo can't reach to you Especially in Russian Federation. Thanks for understand. All products were checked well before delivering, please placing order without concern...
WHOLESALE!! 10pcs Japan FDK 2 phase 4 wire DC stepper motor 18 degrees Specifications : Stepper motor diameter : 20 MM Height : 18 MM (not including front and rear bearing sleeve) Output shaft : 1.5 MM The output shaft length : 7 MM Weight : 23 g (left and right) Current : 6 V 0.28 A short circuit current The step angle : 18 degrees Motor : 2 phase 4 wire Resistance : 20 ohms Package include : 10 pcs motor
Model : THX200 Table size : 200 * 160 Rail Model : HGH20 Screw Size : 25mm diameter lead 5mm (For other specifications can be customized) Stepper motor Model : 86 Type Repeat positioning accuracy : ± 0.01 (mm)